USE OF LABORATORY METHODS TO QUANTIFY DUST SUPPRESSANT EFFECTIVENESS.

D. D. Lane, Terry E Baxter, T. Cuscino, C. Cawherd

Research output: Chapter in Book/Report/Conference proceedingChapter

11 Citations (Scopus)

Abstract

Three types of dust suppressants used in the surface mining industry to control fugitive particulate emissions from unpaved roads were tested for cohesive strength and resistance to reduced effectiveness by large water additions. Each product tested varied in cohesive strength with a range of 34-300 kPa (5-44 psi). Strength depends on aggregate moisture content and the means by which the sample is dried. Large water additions to the road surface after initial suppressant application can produce undesirable results.

Original languageEnglish (US)
Title of host publicationTransactions of the American Institute of Mining, Metallurgical, and Petroleum Engineers, Society
Pages2001-2004
Number of pages4
Volume274
StatePublished - 1983
Externally publishedYes

Fingerprint

Dust
Open pit mining
Particulate emissions
Mineral industry
Water
Moisture

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Lane, D. D., Baxter, T. E., Cuscino, T., & Cawherd, C. (1983). USE OF LABORATORY METHODS TO QUANTIFY DUST SUPPRESSANT EFFECTIVENESS. In Transactions of the American Institute of Mining, Metallurgical, and Petroleum Engineers, Society (Vol. 274, pp. 2001-2004)

USE OF LABORATORY METHODS TO QUANTIFY DUST SUPPRESSANT EFFECTIVENESS. / Lane, D. D.; Baxter, Terry E; Cuscino, T.; Cawherd, C.

Transactions of the American Institute of Mining, Metallurgical, and Petroleum Engineers, Society. Vol. 274 1983. p. 2001-2004.

Research output: Chapter in Book/Report/Conference proceedingChapter

Lane, DD, Baxter, TE, Cuscino, T & Cawherd, C 1983, USE OF LABORATORY METHODS TO QUANTIFY DUST SUPPRESSANT EFFECTIVENESS. in Transactions of the American Institute of Mining, Metallurgical, and Petroleum Engineers, Society. vol. 274, pp. 2001-2004.
Lane DD, Baxter TE, Cuscino T, Cawherd C. USE OF LABORATORY METHODS TO QUANTIFY DUST SUPPRESSANT EFFECTIVENESS. In Transactions of the American Institute of Mining, Metallurgical, and Petroleum Engineers, Society. Vol. 274. 1983. p. 2001-2004
Lane, D. D. ; Baxter, Terry E ; Cuscino, T. ; Cawherd, C. / USE OF LABORATORY METHODS TO QUANTIFY DUST SUPPRESSANT EFFECTIVENESS. Transactions of the American Institute of Mining, Metallurgical, and Petroleum Engineers, Society. Vol. 274 1983. pp. 2001-2004
@inbook{b18f1918208341d995d89db3e92a1d80,
title = "USE OF LABORATORY METHODS TO QUANTIFY DUST SUPPRESSANT EFFECTIVENESS.",
abstract = "Three types of dust suppressants used in the surface mining industry to control fugitive particulate emissions from unpaved roads were tested for cohesive strength and resistance to reduced effectiveness by large water additions. Each product tested varied in cohesive strength with a range of 34-300 kPa (5-44 psi). Strength depends on aggregate moisture content and the means by which the sample is dried. Large water additions to the road surface after initial suppressant application can produce undesirable results.",
author = "Lane, {D. D.} and Baxter, {Terry E} and T. Cuscino and C. Cawherd",
year = "1983",
language = "English (US)",
volume = "274",
pages = "2001--2004",
booktitle = "Transactions of the American Institute of Mining, Metallurgical, and Petroleum Engineers, Society",

}

TY - CHAP

T1 - USE OF LABORATORY METHODS TO QUANTIFY DUST SUPPRESSANT EFFECTIVENESS.

AU - Lane, D. D.

AU - Baxter, Terry E

AU - Cuscino, T.

AU - Cawherd, C.

PY - 1983

Y1 - 1983

N2 - Three types of dust suppressants used in the surface mining industry to control fugitive particulate emissions from unpaved roads were tested for cohesive strength and resistance to reduced effectiveness by large water additions. Each product tested varied in cohesive strength with a range of 34-300 kPa (5-44 psi). Strength depends on aggregate moisture content and the means by which the sample is dried. Large water additions to the road surface after initial suppressant application can produce undesirable results.

AB - Three types of dust suppressants used in the surface mining industry to control fugitive particulate emissions from unpaved roads were tested for cohesive strength and resistance to reduced effectiveness by large water additions. Each product tested varied in cohesive strength with a range of 34-300 kPa (5-44 psi). Strength depends on aggregate moisture content and the means by which the sample is dried. Large water additions to the road surface after initial suppressant application can produce undesirable results.

UR - http://www.scopus.com/inward/record.url?scp=0020995038&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0020995038&partnerID=8YFLogxK

M3 - Chapter

AN - SCOPUS:0020995038

VL - 274

SP - 2001

EP - 2004

BT - Transactions of the American Institute of Mining, Metallurgical, and Petroleum Engineers, Society

ER -