Toward verifying fossil fuel CO2 emissions with the CMAQ model

Motivation, model description and initial simulation

Zhen Liu, Ray P. Bambha, Joseph P. Pinto, Tao Zeng, Jim Boylan, Maoyi Huang, Huimin Lei, Chun Zhao, Shishi Liu, Jiafu Mao, Christopher R Schwalm, Xiaoying Shi, Yaxing Wei, Hope A. Michelsen

Research output: Contribution to journalArticle

4 Citations (Scopus)

Abstract

Motivated by the question of whether and how a state-of-the-art regional chemical transport model (CTM) can facilitate characterization of CO2 spatiotemporal variability and verify CO2 fossil-fuel emissions, we for the first time applied the Community Multiscale Air Quality (CMAQ) model to simulate CO2. This paper presents methods, input data, and initial results for CO2 simulation using CMAQ over the contiguous United States in October 2007. Modeling experiments have been performed to understand the roles of fossil-fuel emissions, biosphere-atmosphere exchange, and meteorology in regulating the spatial distribution of CO2 near the surface over the contiguous United States. Three sets of net ecosystem exchange (NEE) fluxes were used as input to assess the impact of uncertainty of NEE on CO2 concentrations simulated by CMAQ. Observational data from six tall tower sites across the country were used to evaluate model performance. In particular, at the Boulder Atmospheric Observatory (BAO), a tall tower site that receives urban emissions from Denver, CO, the CMAQ model using hourly varying, high-resolution CO2 fossil-fuel emissions from the Vulcan inventory and CarbonTracker optimized NEE reproduced the observed diurnal profile of CO2 reasonably well but with a low bias in the early morning. The spatial distribution of CO2 was found to correlate with NOx, SO2, and CO, because of their similar fossil-fuel emission sources and common transport processes. These initial results from CMAQ demonstrate the potential of using a regional CTM to help interpret CO2 observations and understand CO2 variability in space and time. The ability to simulate a full suite of air pollutants in CMAQ will also facilitate investigations of their use as tracers for CO2 source attribution. This work serves as a proof of concept and the foundation for more comprehensive examinations of CO2 spatiotemporal variability and various uncertainties in the future. Atmospheric CO2 has long been modeled and studied on continental to global scales to understand the global carbon cycle. This work demonstrates the potential of modeling and studying CO2 variability at fine spatiotemporal scales with CMAQ, which has been applied extensively, to study traditionally regulated air pollutants. The abundant observational records of these air pollutants and successful experience in studying and reducing their emissions may be useful for verifying CO2 emissions. Although there remains much more to further investigate, this work opens up a discussion on whether and how to study CO2 as an air pollutant. © 2014

Original languageEnglish (US)
Pages (from-to)419-435
Number of pages17
JournalJournal of the Air and Waste Management Association
Volume64
Issue number4
DOIs
StatePublished - 2014

Fingerprint

fossil fuel
air quality
net ecosystem exchange
simulation
spatial distribution
boulder
transport process
carbon cycle
meteorology
biosphere
modeling
observatory
tracer
air pollutant
atmosphere
experiment

ASJC Scopus subject areas

  • Management, Monitoring, Policy and Law
  • Waste Management and Disposal

Cite this

Toward verifying fossil fuel CO2 emissions with the CMAQ model : Motivation, model description and initial simulation. / Liu, Zhen; Bambha, Ray P.; Pinto, Joseph P.; Zeng, Tao; Boylan, Jim; Huang, Maoyi; Lei, Huimin; Zhao, Chun; Liu, Shishi; Mao, Jiafu; Schwalm, Christopher R; Shi, Xiaoying; Wei, Yaxing; Michelsen, Hope A.

In: Journal of the Air and Waste Management Association, Vol. 64, No. 4, 2014, p. 419-435.

Research output: Contribution to journalArticle

Liu, Z, Bambha, RP, Pinto, JP, Zeng, T, Boylan, J, Huang, M, Lei, H, Zhao, C, Liu, S, Mao, J, Schwalm, CR, Shi, X, Wei, Y & Michelsen, HA 2014, 'Toward verifying fossil fuel CO2 emissions with the CMAQ model: Motivation, model description and initial simulation', Journal of the Air and Waste Management Association, vol. 64, no. 4, pp. 419-435. https://doi.org/10.1080/10962247.2013.816642
Liu, Zhen ; Bambha, Ray P. ; Pinto, Joseph P. ; Zeng, Tao ; Boylan, Jim ; Huang, Maoyi ; Lei, Huimin ; Zhao, Chun ; Liu, Shishi ; Mao, Jiafu ; Schwalm, Christopher R ; Shi, Xiaoying ; Wei, Yaxing ; Michelsen, Hope A. / Toward verifying fossil fuel CO2 emissions with the CMAQ model : Motivation, model description and initial simulation. In: Journal of the Air and Waste Management Association. 2014 ; Vol. 64, No. 4. pp. 419-435.
@article{75f74358ed0c4b978962e695d3b49191,
title = "Toward verifying fossil fuel CO2 emissions with the CMAQ model: Motivation, model description and initial simulation",
abstract = "Motivated by the question of whether and how a state-of-the-art regional chemical transport model (CTM) can facilitate characterization of CO2 spatiotemporal variability and verify CO2 fossil-fuel emissions, we for the first time applied the Community Multiscale Air Quality (CMAQ) model to simulate CO2. This paper presents methods, input data, and initial results for CO2 simulation using CMAQ over the contiguous United States in October 2007. Modeling experiments have been performed to understand the roles of fossil-fuel emissions, biosphere-atmosphere exchange, and meteorology in regulating the spatial distribution of CO2 near the surface over the contiguous United States. Three sets of net ecosystem exchange (NEE) fluxes were used as input to assess the impact of uncertainty of NEE on CO2 concentrations simulated by CMAQ. Observational data from six tall tower sites across the country were used to evaluate model performance. In particular, at the Boulder Atmospheric Observatory (BAO), a tall tower site that receives urban emissions from Denver, CO, the CMAQ model using hourly varying, high-resolution CO2 fossil-fuel emissions from the Vulcan inventory and CarbonTracker optimized NEE reproduced the observed diurnal profile of CO2 reasonably well but with a low bias in the early morning. The spatial distribution of CO2 was found to correlate with NOx, SO2, and CO, because of their similar fossil-fuel emission sources and common transport processes. These initial results from CMAQ demonstrate the potential of using a regional CTM to help interpret CO2 observations and understand CO2 variability in space and time. The ability to simulate a full suite of air pollutants in CMAQ will also facilitate investigations of their use as tracers for CO2 source attribution. This work serves as a proof of concept and the foundation for more comprehensive examinations of CO2 spatiotemporal variability and various uncertainties in the future. Atmospheric CO2 has long been modeled and studied on continental to global scales to understand the global carbon cycle. This work demonstrates the potential of modeling and studying CO2 variability at fine spatiotemporal scales with CMAQ, which has been applied extensively, to study traditionally regulated air pollutants. The abundant observational records of these air pollutants and successful experience in studying and reducing their emissions may be useful for verifying CO2 emissions. Although there remains much more to further investigate, this work opens up a discussion on whether and how to study CO2 as an air pollutant. {\circledC} 2014",
author = "Zhen Liu and Bambha, {Ray P.} and Pinto, {Joseph P.} and Tao Zeng and Jim Boylan and Maoyi Huang and Huimin Lei and Chun Zhao and Shishi Liu and Jiafu Mao and Schwalm, {Christopher R} and Xiaoying Shi and Yaxing Wei and Michelsen, {Hope A.}",
year = "2014",
doi = "10.1080/10962247.2013.816642",
language = "English (US)",
volume = "64",
pages = "419--435",
journal = "Journal of the Air and Waste Management Association",
issn = "1096-2247",
publisher = "Air and Waste Management Association",
number = "4",

}

TY - JOUR

T1 - Toward verifying fossil fuel CO2 emissions with the CMAQ model

T2 - Motivation, model description and initial simulation

AU - Liu, Zhen

AU - Bambha, Ray P.

AU - Pinto, Joseph P.

AU - Zeng, Tao

AU - Boylan, Jim

AU - Huang, Maoyi

AU - Lei, Huimin

AU - Zhao, Chun

AU - Liu, Shishi

AU - Mao, Jiafu

AU - Schwalm, Christopher R

AU - Shi, Xiaoying

AU - Wei, Yaxing

AU - Michelsen, Hope A.

PY - 2014

Y1 - 2014

N2 - Motivated by the question of whether and how a state-of-the-art regional chemical transport model (CTM) can facilitate characterization of CO2 spatiotemporal variability and verify CO2 fossil-fuel emissions, we for the first time applied the Community Multiscale Air Quality (CMAQ) model to simulate CO2. This paper presents methods, input data, and initial results for CO2 simulation using CMAQ over the contiguous United States in October 2007. Modeling experiments have been performed to understand the roles of fossil-fuel emissions, biosphere-atmosphere exchange, and meteorology in regulating the spatial distribution of CO2 near the surface over the contiguous United States. Three sets of net ecosystem exchange (NEE) fluxes were used as input to assess the impact of uncertainty of NEE on CO2 concentrations simulated by CMAQ. Observational data from six tall tower sites across the country were used to evaluate model performance. In particular, at the Boulder Atmospheric Observatory (BAO), a tall tower site that receives urban emissions from Denver, CO, the CMAQ model using hourly varying, high-resolution CO2 fossil-fuel emissions from the Vulcan inventory and CarbonTracker optimized NEE reproduced the observed diurnal profile of CO2 reasonably well but with a low bias in the early morning. The spatial distribution of CO2 was found to correlate with NOx, SO2, and CO, because of their similar fossil-fuel emission sources and common transport processes. These initial results from CMAQ demonstrate the potential of using a regional CTM to help interpret CO2 observations and understand CO2 variability in space and time. The ability to simulate a full suite of air pollutants in CMAQ will also facilitate investigations of their use as tracers for CO2 source attribution. This work serves as a proof of concept and the foundation for more comprehensive examinations of CO2 spatiotemporal variability and various uncertainties in the future. Atmospheric CO2 has long been modeled and studied on continental to global scales to understand the global carbon cycle. This work demonstrates the potential of modeling and studying CO2 variability at fine spatiotemporal scales with CMAQ, which has been applied extensively, to study traditionally regulated air pollutants. The abundant observational records of these air pollutants and successful experience in studying and reducing their emissions may be useful for verifying CO2 emissions. Although there remains much more to further investigate, this work opens up a discussion on whether and how to study CO2 as an air pollutant. © 2014

AB - Motivated by the question of whether and how a state-of-the-art regional chemical transport model (CTM) can facilitate characterization of CO2 spatiotemporal variability and verify CO2 fossil-fuel emissions, we for the first time applied the Community Multiscale Air Quality (CMAQ) model to simulate CO2. This paper presents methods, input data, and initial results for CO2 simulation using CMAQ over the contiguous United States in October 2007. Modeling experiments have been performed to understand the roles of fossil-fuel emissions, biosphere-atmosphere exchange, and meteorology in regulating the spatial distribution of CO2 near the surface over the contiguous United States. Three sets of net ecosystem exchange (NEE) fluxes were used as input to assess the impact of uncertainty of NEE on CO2 concentrations simulated by CMAQ. Observational data from six tall tower sites across the country were used to evaluate model performance. In particular, at the Boulder Atmospheric Observatory (BAO), a tall tower site that receives urban emissions from Denver, CO, the CMAQ model using hourly varying, high-resolution CO2 fossil-fuel emissions from the Vulcan inventory and CarbonTracker optimized NEE reproduced the observed diurnal profile of CO2 reasonably well but with a low bias in the early morning. The spatial distribution of CO2 was found to correlate with NOx, SO2, and CO, because of their similar fossil-fuel emission sources and common transport processes. These initial results from CMAQ demonstrate the potential of using a regional CTM to help interpret CO2 observations and understand CO2 variability in space and time. The ability to simulate a full suite of air pollutants in CMAQ will also facilitate investigations of their use as tracers for CO2 source attribution. This work serves as a proof of concept and the foundation for more comprehensive examinations of CO2 spatiotemporal variability and various uncertainties in the future. Atmospheric CO2 has long been modeled and studied on continental to global scales to understand the global carbon cycle. This work demonstrates the potential of modeling and studying CO2 variability at fine spatiotemporal scales with CMAQ, which has been applied extensively, to study traditionally regulated air pollutants. The abundant observational records of these air pollutants and successful experience in studying and reducing their emissions may be useful for verifying CO2 emissions. Although there remains much more to further investigate, this work opens up a discussion on whether and how to study CO2 as an air pollutant. © 2014

UR - http://www.scopus.com/inward/record.url?scp=84897886547&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84897886547&partnerID=8YFLogxK

U2 - 10.1080/10962247.2013.816642

DO - 10.1080/10962247.2013.816642

M3 - Article

VL - 64

SP - 419

EP - 435

JO - Journal of the Air and Waste Management Association

JF - Journal of the Air and Waste Management Association

SN - 1096-2247

IS - 4

ER -