Structural load bearing supercapacitors using a pegdge based solid polymer electrolyte matrix

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Abstract

The interest in developing multifunctional materials has greatly increased in the last decade. Power storage composites are just one class of multifunctional materials that has the potential to lead to significant size and weight reduction. Many electronic devices (i.e. laptops, cellphones, iPods, etc.) and mechanical systems that require or generate electrical power during operation (i.e., hybrid or fully electric cars, wind turbines, airplanes, etc.) could benefit substantially from these materials. While several types of power storage structural composites have been developed to date, i.e. composite batteries and fuel cells, structural load bearing super- and ultra-capacitors appear to be the most promising ones. To date, two classes of structural capacitors have been explored: dielectric and solid electrolyte capacitors; the former are suitable for applications where very high voltage bursts of electrical energy are needed, while the latter are suitable for applications where lower voltage levels are required (i.e. more general power storage/delivery applications). This paper describes the efforts made to develop and characterize electro-mechanically structural supercapacitors. The load-bearing supercapacitors discussed here have been made with carbon fiber weave electrodes and separators of various materials, glued together with a solid polymer electrolyte (SPE) matrix. Electrochemical characterization reported specific capacitances as high as 2.9μF/mm 3 and energy densities as high as 4.9 kJ/g.

Original languageEnglish (US)
Title of host publicationASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2011
Pages141-148
Number of pages8
Volume1
StatePublished - 2011
EventASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2011 - Scottsdale, AZ, United States
Duration: Sep 18 2011Sep 21 2011

Other

OtherASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2011
CountryUnited States
CityScottsdale, AZ
Period9/18/119/21/11

Fingerprint

Bearings (structural)
Structural loads
Electrolytes
Polymers
Capacitors
Fuel cells
Composite materials
Solid electrolytes
Electric potential
Separators
Wind turbines
Carbon fibers
Capacitance
Railroad cars
Aircraft
Electrodes
Supercapacitor

ASJC Scopus subject areas

  • Civil and Structural Engineering
  • Biomaterials

Cite this

Gallagher, T. M., Ciocanel, C., & Browder, C. C. (2011). Structural load bearing supercapacitors using a pegdge based solid polymer electrolyte matrix. In ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2011 (Vol. 1, pp. 141-148)

Structural load bearing supercapacitors using a pegdge based solid polymer electrolyte matrix. / Gallagher, Tanya M.; Ciocanel, Constantin; Browder, Cindy C.

ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2011. Vol. 1 2011. p. 141-148.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gallagher, TM, Ciocanel, C & Browder, CC 2011, Structural load bearing supercapacitors using a pegdge based solid polymer electrolyte matrix. in ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2011. vol. 1, pp. 141-148, ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2011, Scottsdale, AZ, United States, 9/18/11.
Gallagher TM, Ciocanel C, Browder CC. Structural load bearing supercapacitors using a pegdge based solid polymer electrolyte matrix. In ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2011. Vol. 1. 2011. p. 141-148
Gallagher, Tanya M. ; Ciocanel, Constantin ; Browder, Cindy C. / Structural load bearing supercapacitors using a pegdge based solid polymer electrolyte matrix. ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2011. Vol. 1 2011. pp. 141-148
@inproceedings{0cc235fd842b4f5788413cea41842aa3,
title = "Structural load bearing supercapacitors using a pegdge based solid polymer electrolyte matrix",
abstract = "The interest in developing multifunctional materials has greatly increased in the last decade. Power storage composites are just one class of multifunctional materials that has the potential to lead to significant size and weight reduction. Many electronic devices (i.e. laptops, cellphones, iPods, etc.) and mechanical systems that require or generate electrical power during operation (i.e., hybrid or fully electric cars, wind turbines, airplanes, etc.) could benefit substantially from these materials. While several types of power storage structural composites have been developed to date, i.e. composite batteries and fuel cells, structural load bearing super- and ultra-capacitors appear to be the most promising ones. To date, two classes of structural capacitors have been explored: dielectric and solid electrolyte capacitors; the former are suitable for applications where very high voltage bursts of electrical energy are needed, while the latter are suitable for applications where lower voltage levels are required (i.e. more general power storage/delivery applications). This paper describes the efforts made to develop and characterize electro-mechanically structural supercapacitors. The load-bearing supercapacitors discussed here have been made with carbon fiber weave electrodes and separators of various materials, glued together with a solid polymer electrolyte (SPE) matrix. Electrochemical characterization reported specific capacitances as high as 2.9μF/mm 3 and energy densities as high as 4.9 kJ/g.",
author = "Gallagher, {Tanya M.} and Constantin Ciocanel and Browder, {Cindy C}",
year = "2011",
language = "English (US)",
isbn = "9780791854716",
volume = "1",
pages = "141--148",
booktitle = "ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2011",

}

TY - GEN

T1 - Structural load bearing supercapacitors using a pegdge based solid polymer electrolyte matrix

AU - Gallagher, Tanya M.

AU - Ciocanel, Constantin

AU - Browder, Cindy C

PY - 2011

Y1 - 2011

N2 - The interest in developing multifunctional materials has greatly increased in the last decade. Power storage composites are just one class of multifunctional materials that has the potential to lead to significant size and weight reduction. Many electronic devices (i.e. laptops, cellphones, iPods, etc.) and mechanical systems that require or generate electrical power during operation (i.e., hybrid or fully electric cars, wind turbines, airplanes, etc.) could benefit substantially from these materials. While several types of power storage structural composites have been developed to date, i.e. composite batteries and fuel cells, structural load bearing super- and ultra-capacitors appear to be the most promising ones. To date, two classes of structural capacitors have been explored: dielectric and solid electrolyte capacitors; the former are suitable for applications where very high voltage bursts of electrical energy are needed, while the latter are suitable for applications where lower voltage levels are required (i.e. more general power storage/delivery applications). This paper describes the efforts made to develop and characterize electro-mechanically structural supercapacitors. The load-bearing supercapacitors discussed here have been made with carbon fiber weave electrodes and separators of various materials, glued together with a solid polymer electrolyte (SPE) matrix. Electrochemical characterization reported specific capacitances as high as 2.9μF/mm 3 and energy densities as high as 4.9 kJ/g.

AB - The interest in developing multifunctional materials has greatly increased in the last decade. Power storage composites are just one class of multifunctional materials that has the potential to lead to significant size and weight reduction. Many electronic devices (i.e. laptops, cellphones, iPods, etc.) and mechanical systems that require or generate electrical power during operation (i.e., hybrid or fully electric cars, wind turbines, airplanes, etc.) could benefit substantially from these materials. While several types of power storage structural composites have been developed to date, i.e. composite batteries and fuel cells, structural load bearing super- and ultra-capacitors appear to be the most promising ones. To date, two classes of structural capacitors have been explored: dielectric and solid electrolyte capacitors; the former are suitable for applications where very high voltage bursts of electrical energy are needed, while the latter are suitable for applications where lower voltage levels are required (i.e. more general power storage/delivery applications). This paper describes the efforts made to develop and characterize electro-mechanically structural supercapacitors. The load-bearing supercapacitors discussed here have been made with carbon fiber weave electrodes and separators of various materials, glued together with a solid polymer electrolyte (SPE) matrix. Electrochemical characterization reported specific capacitances as high as 2.9μF/mm 3 and energy densities as high as 4.9 kJ/g.

UR - http://www.scopus.com/inward/record.url?scp=84859545149&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84859545149&partnerID=8YFLogxK

M3 - Conference contribution

SN - 9780791854716

VL - 1

SP - 141

EP - 148

BT - ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2011

ER -