Redeveloping the mechanics and vibration laboratory

A problem solving approach

Mohammad Elahinia, Constantin Ciocanel

Research output: Contribution to journalArticle

5 Citations (Scopus)

Abstract

This paper presents the redevelopment method and process of the laboratory experiments for the Mechanics and Vibration Laboratory, MIME3390, in the Mechanical, Industrial, and Manufacturing Engineering Department at the University of Toledo. The redevelopment objective was to transform the learning process from a subject-based learning to a problem-solving learning. Particular objective was to provide the students with more hands-on experience and to challenge them by requesting the procedure for each laboratory experiment to be designed and carried out by each group of students. This senior level laboratory course consists of experiments in deformable solid mechanics including stress and deflection analysis, fatigue life evaluation, stability and mechanical vibration. Prerequisite courses for this laboratory are Mechanical Design I and Mechanical Vibrations. In line with the program objectives of the department, the following list of objectives has been defined for this course: "Upon successful completion of this course, the students should have: (1) become knowledgeable in the use of standard instrumentation for static and dynamic structural testing, such as strain gages, load frames, impact hammers, and spectrum analyzers; (2) reinforced material studied in previous mechanics and vibrations courses; (3) improved data analysis skills, and (4) further developed laboratory and technical writing skills." Prior to this redevelopment, as part of the subject-based approach, a classroom lecture preceded each laboratory session. The lecture consisted of the review of the theory pertaining to each experiment to help students refresh their knowledge on the subject. Additionally the description and procedure of the laboratory experiment was covered during this lecture. Prior to each class, the lecture notes, along with the laboratory procedures, were posted on the course website. The step-by-step instructions for each experiment were provided to assist the students in setting up and conducting each experiment. Throughout the semester, eleven experiments were performed. The students wrote individual reports on the experiments consisting of a summary of the acquired data, data analysis, and observations. However, due to the number of students and limited number of lab sessions it was difficult to provide the students with the real hands-on experience with the instrumentation and lab setup. As a result, during the lab the student mostly collected data according to the lab procedure and compiled a report that sometimes was inspired by samples of reports written by former students.

Original languageEnglish (US)
JournalASEE Annual Conference and Exposition, Conference Proceedings
StatePublished - 2006
Externally publishedYes

Fingerprint

Mechanics
Students
Experiments
Technical writing
Spectrum analyzers
Hammers
Structural dynamics
Strain gages
Websites
Fatigue of materials
Testing

ASJC Scopus subject areas

  • Engineering(all)

Cite this

@article{78c55a6edd534ad9bfcd88f5d8a38e50,
title = "Redeveloping the mechanics and vibration laboratory: A problem solving approach",
abstract = "This paper presents the redevelopment method and process of the laboratory experiments for the Mechanics and Vibration Laboratory, MIME3390, in the Mechanical, Industrial, and Manufacturing Engineering Department at the University of Toledo. The redevelopment objective was to transform the learning process from a subject-based learning to a problem-solving learning. Particular objective was to provide the students with more hands-on experience and to challenge them by requesting the procedure for each laboratory experiment to be designed and carried out by each group of students. This senior level laboratory course consists of experiments in deformable solid mechanics including stress and deflection analysis, fatigue life evaluation, stability and mechanical vibration. Prerequisite courses for this laboratory are Mechanical Design I and Mechanical Vibrations. In line with the program objectives of the department, the following list of objectives has been defined for this course: {"}Upon successful completion of this course, the students should have: (1) become knowledgeable in the use of standard instrumentation for static and dynamic structural testing, such as strain gages, load frames, impact hammers, and spectrum analyzers; (2) reinforced material studied in previous mechanics and vibrations courses; (3) improved data analysis skills, and (4) further developed laboratory and technical writing skills.{"} Prior to this redevelopment, as part of the subject-based approach, a classroom lecture preceded each laboratory session. The lecture consisted of the review of the theory pertaining to each experiment to help students refresh their knowledge on the subject. Additionally the description and procedure of the laboratory experiment was covered during this lecture. Prior to each class, the lecture notes, along with the laboratory procedures, were posted on the course website. The step-by-step instructions for each experiment were provided to assist the students in setting up and conducting each experiment. Throughout the semester, eleven experiments were performed. The students wrote individual reports on the experiments consisting of a summary of the acquired data, data analysis, and observations. However, due to the number of students and limited number of lab sessions it was difficult to provide the students with the real hands-on experience with the instrumentation and lab setup. As a result, during the lab the student mostly collected data according to the lab procedure and compiled a report that sometimes was inspired by samples of reports written by former students.",
author = "Mohammad Elahinia and Constantin Ciocanel",
year = "2006",
language = "English (US)",
journal = "ASEE Annual Conference and Exposition, Conference Proceedings",
issn = "2153-5965",

}

TY - JOUR

T1 - Redeveloping the mechanics and vibration laboratory

T2 - A problem solving approach

AU - Elahinia, Mohammad

AU - Ciocanel, Constantin

PY - 2006

Y1 - 2006

N2 - This paper presents the redevelopment method and process of the laboratory experiments for the Mechanics and Vibration Laboratory, MIME3390, in the Mechanical, Industrial, and Manufacturing Engineering Department at the University of Toledo. The redevelopment objective was to transform the learning process from a subject-based learning to a problem-solving learning. Particular objective was to provide the students with more hands-on experience and to challenge them by requesting the procedure for each laboratory experiment to be designed and carried out by each group of students. This senior level laboratory course consists of experiments in deformable solid mechanics including stress and deflection analysis, fatigue life evaluation, stability and mechanical vibration. Prerequisite courses for this laboratory are Mechanical Design I and Mechanical Vibrations. In line with the program objectives of the department, the following list of objectives has been defined for this course: "Upon successful completion of this course, the students should have: (1) become knowledgeable in the use of standard instrumentation for static and dynamic structural testing, such as strain gages, load frames, impact hammers, and spectrum analyzers; (2) reinforced material studied in previous mechanics and vibrations courses; (3) improved data analysis skills, and (4) further developed laboratory and technical writing skills." Prior to this redevelopment, as part of the subject-based approach, a classroom lecture preceded each laboratory session. The lecture consisted of the review of the theory pertaining to each experiment to help students refresh their knowledge on the subject. Additionally the description and procedure of the laboratory experiment was covered during this lecture. Prior to each class, the lecture notes, along with the laboratory procedures, were posted on the course website. The step-by-step instructions for each experiment were provided to assist the students in setting up and conducting each experiment. Throughout the semester, eleven experiments were performed. The students wrote individual reports on the experiments consisting of a summary of the acquired data, data analysis, and observations. However, due to the number of students and limited number of lab sessions it was difficult to provide the students with the real hands-on experience with the instrumentation and lab setup. As a result, during the lab the student mostly collected data according to the lab procedure and compiled a report that sometimes was inspired by samples of reports written by former students.

AB - This paper presents the redevelopment method and process of the laboratory experiments for the Mechanics and Vibration Laboratory, MIME3390, in the Mechanical, Industrial, and Manufacturing Engineering Department at the University of Toledo. The redevelopment objective was to transform the learning process from a subject-based learning to a problem-solving learning. Particular objective was to provide the students with more hands-on experience and to challenge them by requesting the procedure for each laboratory experiment to be designed and carried out by each group of students. This senior level laboratory course consists of experiments in deformable solid mechanics including stress and deflection analysis, fatigue life evaluation, stability and mechanical vibration. Prerequisite courses for this laboratory are Mechanical Design I and Mechanical Vibrations. In line with the program objectives of the department, the following list of objectives has been defined for this course: "Upon successful completion of this course, the students should have: (1) become knowledgeable in the use of standard instrumentation for static and dynamic structural testing, such as strain gages, load frames, impact hammers, and spectrum analyzers; (2) reinforced material studied in previous mechanics and vibrations courses; (3) improved data analysis skills, and (4) further developed laboratory and technical writing skills." Prior to this redevelopment, as part of the subject-based approach, a classroom lecture preceded each laboratory session. The lecture consisted of the review of the theory pertaining to each experiment to help students refresh their knowledge on the subject. Additionally the description and procedure of the laboratory experiment was covered during this lecture. Prior to each class, the lecture notes, along with the laboratory procedures, were posted on the course website. The step-by-step instructions for each experiment were provided to assist the students in setting up and conducting each experiment. Throughout the semester, eleven experiments were performed. The students wrote individual reports on the experiments consisting of a summary of the acquired data, data analysis, and observations. However, due to the number of students and limited number of lab sessions it was difficult to provide the students with the real hands-on experience with the instrumentation and lab setup. As a result, during the lab the student mostly collected data according to the lab procedure and compiled a report that sometimes was inspired by samples of reports written by former students.

UR - http://www.scopus.com/inward/record.url?scp=85029128297&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85029128297&partnerID=8YFLogxK

M3 - Article

JO - ASEE Annual Conference and Exposition, Conference Proceedings

JF - ASEE Annual Conference and Exposition, Conference Proceedings

SN - 2153-5965

ER -