Performance Comparison between Fiber-Reinforced and Rubber-Modified Asphalt

Chun-Hsing Ho, Junyi Shan

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

This paper presents the performance and evaluation of fiber-reinforced asphalt concrete (FRA) in comparison with the rubber modified asphalt (RMA) through laboratory experiments and field observations. Rubber/polymer is believed to enhance the binding properties of the asphalt pavements to increase their engineering characteristics. Some of researchers and highway agencies in the cold regions have considered to add fibers in the currently used RMA to produce fiber-reinforced rubber-modified asphalt concrete (FRMA) to improve its resistance to low temperature cracking and reflective cracking. However, due to the recent cost increase of polymer/rubber material, the possibility of replacing RMA with FRA is being proposed. Thus, it is important to research and investigate the performance between the FRA and RMA. A fiber reinforced asphalt overlay project was constructed on S. Knoles Drive near the Applied Research and Development (ARD) Building at Northern Arizona University. The overlay project (429'Length x 16.75' Width) was conducted with two types of asphalt mixtures including RMA and FRA to be placed adjacent to each travel lane of the road. Because fiber reinforced asphalt mix has never been used in roadway design and construction in Northern Arizona, it is of interest to understand its resistance to freezing-Thawing effect, fatigue cracking, and low temperature cracking. A material testing is undergoing to investigate the performance of FRA pavements in comparison with the currently used RMA pavements so as to provide better understanding of the role played by the fiber in improving the performance of conventional asphalt pavements. Asphalt samples from both asphalt mixtures were collected at the back of a paver from both lances at the time of laydown. These samples were used in the following lab tests: freeze-Thaw cycle durability test, and low temperature cracking resistance test using a bending beam rheometer (BBR). The results from the lab tests help generate predictions of low-Temperature performance of the two types of asphalt pavement. Field inspections have been scheduled to assess pavement surface conditions. By combing the lab test results with field assessments, the paper provides an analysis to help with decision making in whether it is appropriate to replace currently used RMA pavements with FRA pavements.

Original languageEnglish (US)
Title of host publicationGeotechnical and Structural Engineering Congress 2016 - Proceedings of the Joint Geotechnical and Structural Engineering Congress 2016
PublisherAmerican Society of Civil Engineers (ASCE)
Pages1166-1175
Number of pages10
ISBN (Print)9780784479742
StatePublished - 2016
EventJoint Geotechnical and Structural Engineering Congress 2016 - Phoenix, United States
Duration: Feb 14 2016Feb 17 2016

Other

OtherJoint Geotechnical and Structural Engineering Congress 2016
CountryUnited States
CityPhoenix
Period2/14/162/17/16

Fingerprint

asphalt
Asphalt
rubber
Rubber
Asphalt concrete
Asphalt pavements
Fibers
pavement
Asphalt mixtures
Concrete pavements
comparison
fibre
Pavement overlays
Temperature
Thawing
Materials testing
Rheometers
Polymers
Freezing
Pavements

ASJC Scopus subject areas

  • Geotechnical Engineering and Engineering Geology
  • Civil and Structural Engineering

Cite this

Ho, C-H., & Shan, J. (2016). Performance Comparison between Fiber-Reinforced and Rubber-Modified Asphalt. In Geotechnical and Structural Engineering Congress 2016 - Proceedings of the Joint Geotechnical and Structural Engineering Congress 2016 (pp. 1166-1175). American Society of Civil Engineers (ASCE).

Performance Comparison between Fiber-Reinforced and Rubber-Modified Asphalt. / Ho, Chun-Hsing; Shan, Junyi.

Geotechnical and Structural Engineering Congress 2016 - Proceedings of the Joint Geotechnical and Structural Engineering Congress 2016. American Society of Civil Engineers (ASCE), 2016. p. 1166-1175.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ho, C-H & Shan, J 2016, Performance Comparison between Fiber-Reinforced and Rubber-Modified Asphalt. in Geotechnical and Structural Engineering Congress 2016 - Proceedings of the Joint Geotechnical and Structural Engineering Congress 2016. American Society of Civil Engineers (ASCE), pp. 1166-1175, Joint Geotechnical and Structural Engineering Congress 2016, Phoenix, United States, 2/14/16.
Ho C-H, Shan J. Performance Comparison between Fiber-Reinforced and Rubber-Modified Asphalt. In Geotechnical and Structural Engineering Congress 2016 - Proceedings of the Joint Geotechnical and Structural Engineering Congress 2016. American Society of Civil Engineers (ASCE). 2016. p. 1166-1175
Ho, Chun-Hsing ; Shan, Junyi. / Performance Comparison between Fiber-Reinforced and Rubber-Modified Asphalt. Geotechnical and Structural Engineering Congress 2016 - Proceedings of the Joint Geotechnical and Structural Engineering Congress 2016. American Society of Civil Engineers (ASCE), 2016. pp. 1166-1175
@inproceedings{fc651346b0a4410ea36caadbf4235372,
title = "Performance Comparison between Fiber-Reinforced and Rubber-Modified Asphalt",
abstract = "This paper presents the performance and evaluation of fiber-reinforced asphalt concrete (FRA) in comparison with the rubber modified asphalt (RMA) through laboratory experiments and field observations. Rubber/polymer is believed to enhance the binding properties of the asphalt pavements to increase their engineering characteristics. Some of researchers and highway agencies in the cold regions have considered to add fibers in the currently used RMA to produce fiber-reinforced rubber-modified asphalt concrete (FRMA) to improve its resistance to low temperature cracking and reflective cracking. However, due to the recent cost increase of polymer/rubber material, the possibility of replacing RMA with FRA is being proposed. Thus, it is important to research and investigate the performance between the FRA and RMA. A fiber reinforced asphalt overlay project was constructed on S. Knoles Drive near the Applied Research and Development (ARD) Building at Northern Arizona University. The overlay project (429'Length x 16.75' Width) was conducted with two types of asphalt mixtures including RMA and FRA to be placed adjacent to each travel lane of the road. Because fiber reinforced asphalt mix has never been used in roadway design and construction in Northern Arizona, it is of interest to understand its resistance to freezing-Thawing effect, fatigue cracking, and low temperature cracking. A material testing is undergoing to investigate the performance of FRA pavements in comparison with the currently used RMA pavements so as to provide better understanding of the role played by the fiber in improving the performance of conventional asphalt pavements. Asphalt samples from both asphalt mixtures were collected at the back of a paver from both lances at the time of laydown. These samples were used in the following lab tests: freeze-Thaw cycle durability test, and low temperature cracking resistance test using a bending beam rheometer (BBR). The results from the lab tests help generate predictions of low-Temperature performance of the two types of asphalt pavement. Field inspections have been scheduled to assess pavement surface conditions. By combing the lab test results with field assessments, the paper provides an analysis to help with decision making in whether it is appropriate to replace currently used RMA pavements with FRA pavements.",
author = "Chun-Hsing Ho and Junyi Shan",
year = "2016",
language = "English (US)",
isbn = "9780784479742",
pages = "1166--1175",
booktitle = "Geotechnical and Structural Engineering Congress 2016 - Proceedings of the Joint Geotechnical and Structural Engineering Congress 2016",
publisher = "American Society of Civil Engineers (ASCE)",

}

TY - GEN

T1 - Performance Comparison between Fiber-Reinforced and Rubber-Modified Asphalt

AU - Ho, Chun-Hsing

AU - Shan, Junyi

PY - 2016

Y1 - 2016

N2 - This paper presents the performance and evaluation of fiber-reinforced asphalt concrete (FRA) in comparison with the rubber modified asphalt (RMA) through laboratory experiments and field observations. Rubber/polymer is believed to enhance the binding properties of the asphalt pavements to increase their engineering characteristics. Some of researchers and highway agencies in the cold regions have considered to add fibers in the currently used RMA to produce fiber-reinforced rubber-modified asphalt concrete (FRMA) to improve its resistance to low temperature cracking and reflective cracking. However, due to the recent cost increase of polymer/rubber material, the possibility of replacing RMA with FRA is being proposed. Thus, it is important to research and investigate the performance between the FRA and RMA. A fiber reinforced asphalt overlay project was constructed on S. Knoles Drive near the Applied Research and Development (ARD) Building at Northern Arizona University. The overlay project (429'Length x 16.75' Width) was conducted with two types of asphalt mixtures including RMA and FRA to be placed adjacent to each travel lane of the road. Because fiber reinforced asphalt mix has never been used in roadway design and construction in Northern Arizona, it is of interest to understand its resistance to freezing-Thawing effect, fatigue cracking, and low temperature cracking. A material testing is undergoing to investigate the performance of FRA pavements in comparison with the currently used RMA pavements so as to provide better understanding of the role played by the fiber in improving the performance of conventional asphalt pavements. Asphalt samples from both asphalt mixtures were collected at the back of a paver from both lances at the time of laydown. These samples were used in the following lab tests: freeze-Thaw cycle durability test, and low temperature cracking resistance test using a bending beam rheometer (BBR). The results from the lab tests help generate predictions of low-Temperature performance of the two types of asphalt pavement. Field inspections have been scheduled to assess pavement surface conditions. By combing the lab test results with field assessments, the paper provides an analysis to help with decision making in whether it is appropriate to replace currently used RMA pavements with FRA pavements.

AB - This paper presents the performance and evaluation of fiber-reinforced asphalt concrete (FRA) in comparison with the rubber modified asphalt (RMA) through laboratory experiments and field observations. Rubber/polymer is believed to enhance the binding properties of the asphalt pavements to increase their engineering characteristics. Some of researchers and highway agencies in the cold regions have considered to add fibers in the currently used RMA to produce fiber-reinforced rubber-modified asphalt concrete (FRMA) to improve its resistance to low temperature cracking and reflective cracking. However, due to the recent cost increase of polymer/rubber material, the possibility of replacing RMA with FRA is being proposed. Thus, it is important to research and investigate the performance between the FRA and RMA. A fiber reinforced asphalt overlay project was constructed on S. Knoles Drive near the Applied Research and Development (ARD) Building at Northern Arizona University. The overlay project (429'Length x 16.75' Width) was conducted with two types of asphalt mixtures including RMA and FRA to be placed adjacent to each travel lane of the road. Because fiber reinforced asphalt mix has never been used in roadway design and construction in Northern Arizona, it is of interest to understand its resistance to freezing-Thawing effect, fatigue cracking, and low temperature cracking. A material testing is undergoing to investigate the performance of FRA pavements in comparison with the currently used RMA pavements so as to provide better understanding of the role played by the fiber in improving the performance of conventional asphalt pavements. Asphalt samples from both asphalt mixtures were collected at the back of a paver from both lances at the time of laydown. These samples were used in the following lab tests: freeze-Thaw cycle durability test, and low temperature cracking resistance test using a bending beam rheometer (BBR). The results from the lab tests help generate predictions of low-Temperature performance of the two types of asphalt pavement. Field inspections have been scheduled to assess pavement surface conditions. By combing the lab test results with field assessments, the paper provides an analysis to help with decision making in whether it is appropriate to replace currently used RMA pavements with FRA pavements.

UR - http://www.scopus.com/inward/record.url?scp=84966655502&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84966655502&partnerID=8YFLogxK

M3 - Conference contribution

SN - 9780784479742

SP - 1166

EP - 1175

BT - Geotechnical and Structural Engineering Congress 2016 - Proceedings of the Joint Geotechnical and Structural Engineering Congress 2016

PB - American Society of Civil Engineers (ASCE)

ER -