Elliptically framed tip-tilt mirror optimized for stellar tracking

James H. Clark, F E Penado, Jeremy Petak

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

We compare a design innovation of an elliptically framed tip-tilt optical tracker with an existing circularly framed tracker for the Navy Precision Optical Interferometer. The tracker stabilizes a 12.5 cm stellar beam on a target hundreds of meters away and requires an increase in operational frequency. We reduced mass and size by integrating an elliptical mirror as one of the rotating components, which eliminated a rotating frame. We used the same materials as the existing tracker; however, light-weighted both the aluminum frame and Zerodur® mirror. We generated a computer-aided design model, converted it into a finite element model and performed modal analysis on two load cases. In load case 1, we tied down three points on the bottom surface of the tracker corresponding to the tie-down points of the comparison tracker. This reveals a first mode (lowest) frequency of 140 Hz, a factor of two over the baseline tracker's first mode frequency of 67 Hz. In load case 2, we constrained four additional points inboard of the corners of the tracker base, for a total of seven tie-downs, simulating a firmly bolted and secured mount. The first mode of vibration for this case is 211 Hz, an increase over load case 1 by a factor of 1.5 and more than three times the fundamental frequency of the existing tracker. We conclude that these geometrical changes with the additional tie-down bolts are a viable solution path forward to improve steering speed and recommend a continuation with this effort.

Original languageEnglish (US)
Title of host publicationProceedings of SPIE - The International Society for Optical Engineering
PublisherSPIE
Volume9573
ISBN (Print)9781628417395
DOIs
StatePublished - 2015
EventOptomechanical Engineering 2015 - San Diego, United States
Duration: Aug 10 2015Aug 12 2015

Other

OtherOptomechanical Engineering 2015
CountryUnited States
CitySan Diego
Period8/10/158/12/15

Fingerprint

Tip-tilt
Tie
Mirror
Mirrors
mirrors
Rotating
Modal analysis
Bolts
Aluminum
Interferometers
Computer aided design
Modal Analysis
Fundamental Frequency
Innovation
Computer-aided Design
Overload
Interferometer
bolts
Finite Element Model
navy

Keywords

  • Elliptical flat mirrors
  • Frequency response
  • Natural frequency
  • NPOI
  • Optical interferometry
  • Optomechanical tracker

ASJC Scopus subject areas

  • Applied Mathematics
  • Computer Science Applications
  • Electrical and Electronic Engineering
  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics

Cite this

Clark, J. H., Penado, F. E., & Petak, J. (2015). Elliptically framed tip-tilt mirror optimized for stellar tracking. In Proceedings of SPIE - The International Society for Optical Engineering (Vol. 9573). [95730B] SPIE. https://doi.org/10.1117/12.2187559

Elliptically framed tip-tilt mirror optimized for stellar tracking. / Clark, James H.; Penado, F E; Petak, Jeremy.

Proceedings of SPIE - The International Society for Optical Engineering. Vol. 9573 SPIE, 2015. 95730B.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Clark, JH, Penado, FE & Petak, J 2015, Elliptically framed tip-tilt mirror optimized for stellar tracking. in Proceedings of SPIE - The International Society for Optical Engineering. vol. 9573, 95730B, SPIE, Optomechanical Engineering 2015, San Diego, United States, 8/10/15. https://doi.org/10.1117/12.2187559
Clark JH, Penado FE, Petak J. Elliptically framed tip-tilt mirror optimized for stellar tracking. In Proceedings of SPIE - The International Society for Optical Engineering. Vol. 9573. SPIE. 2015. 95730B https://doi.org/10.1117/12.2187559
Clark, James H. ; Penado, F E ; Petak, Jeremy. / Elliptically framed tip-tilt mirror optimized for stellar tracking. Proceedings of SPIE - The International Society for Optical Engineering. Vol. 9573 SPIE, 2015.
@inproceedings{e34503b259a94513a4cb7d7ebe9d84f8,
title = "Elliptically framed tip-tilt mirror optimized for stellar tracking",
abstract = "We compare a design innovation of an elliptically framed tip-tilt optical tracker with an existing circularly framed tracker for the Navy Precision Optical Interferometer. The tracker stabilizes a 12.5 cm stellar beam on a target hundreds of meters away and requires an increase in operational frequency. We reduced mass and size by integrating an elliptical mirror as one of the rotating components, which eliminated a rotating frame. We used the same materials as the existing tracker; however, light-weighted both the aluminum frame and Zerodur{\circledR} mirror. We generated a computer-aided design model, converted it into a finite element model and performed modal analysis on two load cases. In load case 1, we tied down three points on the bottom surface of the tracker corresponding to the tie-down points of the comparison tracker. This reveals a first mode (lowest) frequency of 140 Hz, a factor of two over the baseline tracker's first mode frequency of 67 Hz. In load case 2, we constrained four additional points inboard of the corners of the tracker base, for a total of seven tie-downs, simulating a firmly bolted and secured mount. The first mode of vibration for this case is 211 Hz, an increase over load case 1 by a factor of 1.5 and more than three times the fundamental frequency of the existing tracker. We conclude that these geometrical changes with the additional tie-down bolts are a viable solution path forward to improve steering speed and recommend a continuation with this effort.",
keywords = "Elliptical flat mirrors, Frequency response, Natural frequency, NPOI, Optical interferometry, Optomechanical tracker",
author = "Clark, {James H.} and Penado, {F E} and Jeremy Petak",
year = "2015",
doi = "10.1117/12.2187559",
language = "English (US)",
isbn = "9781628417395",
volume = "9573",
booktitle = "Proceedings of SPIE - The International Society for Optical Engineering",
publisher = "SPIE",

}

TY - GEN

T1 - Elliptically framed tip-tilt mirror optimized for stellar tracking

AU - Clark, James H.

AU - Penado, F E

AU - Petak, Jeremy

PY - 2015

Y1 - 2015

N2 - We compare a design innovation of an elliptically framed tip-tilt optical tracker with an existing circularly framed tracker for the Navy Precision Optical Interferometer. The tracker stabilizes a 12.5 cm stellar beam on a target hundreds of meters away and requires an increase in operational frequency. We reduced mass and size by integrating an elliptical mirror as one of the rotating components, which eliminated a rotating frame. We used the same materials as the existing tracker; however, light-weighted both the aluminum frame and Zerodur® mirror. We generated a computer-aided design model, converted it into a finite element model and performed modal analysis on two load cases. In load case 1, we tied down three points on the bottom surface of the tracker corresponding to the tie-down points of the comparison tracker. This reveals a first mode (lowest) frequency of 140 Hz, a factor of two over the baseline tracker's first mode frequency of 67 Hz. In load case 2, we constrained four additional points inboard of the corners of the tracker base, for a total of seven tie-downs, simulating a firmly bolted and secured mount. The first mode of vibration for this case is 211 Hz, an increase over load case 1 by a factor of 1.5 and more than three times the fundamental frequency of the existing tracker. We conclude that these geometrical changes with the additional tie-down bolts are a viable solution path forward to improve steering speed and recommend a continuation with this effort.

AB - We compare a design innovation of an elliptically framed tip-tilt optical tracker with an existing circularly framed tracker for the Navy Precision Optical Interferometer. The tracker stabilizes a 12.5 cm stellar beam on a target hundreds of meters away and requires an increase in operational frequency. We reduced mass and size by integrating an elliptical mirror as one of the rotating components, which eliminated a rotating frame. We used the same materials as the existing tracker; however, light-weighted both the aluminum frame and Zerodur® mirror. We generated a computer-aided design model, converted it into a finite element model and performed modal analysis on two load cases. In load case 1, we tied down three points on the bottom surface of the tracker corresponding to the tie-down points of the comparison tracker. This reveals a first mode (lowest) frequency of 140 Hz, a factor of two over the baseline tracker's first mode frequency of 67 Hz. In load case 2, we constrained four additional points inboard of the corners of the tracker base, for a total of seven tie-downs, simulating a firmly bolted and secured mount. The first mode of vibration for this case is 211 Hz, an increase over load case 1 by a factor of 1.5 and more than three times the fundamental frequency of the existing tracker. We conclude that these geometrical changes with the additional tie-down bolts are a viable solution path forward to improve steering speed and recommend a continuation with this effort.

KW - Elliptical flat mirrors

KW - Frequency response

KW - Natural frequency

KW - NPOI

KW - Optical interferometry

KW - Optomechanical tracker

UR - http://www.scopus.com/inward/record.url?scp=84950972707&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84950972707&partnerID=8YFLogxK

U2 - 10.1117/12.2187559

DO - 10.1117/12.2187559

M3 - Conference contribution

SN - 9781628417395

VL - 9573

BT - Proceedings of SPIE - The International Society for Optical Engineering

PB - SPIE

ER -