A rapid mix flow cytometer with subsecond kinetic resolution

J. P. Nolan, Richard G Posner, J. C. Martin, R. Habbersett, L. A. Sklar

Research output: Contribution to journalArticle

36 Citations (Scopus)

Abstract

Kinetic approaches are valuable tools for mechanistic studies of cell function. Flow cytometry is well suited to make sensitive kinetic measurements, but the time required to deliver mixed samples to the point of measurement (10-20 s in a conventional cytometer) limits analysis of rapidly occurring events. To address this limitation, we adapted a syringe-based stopped-flow rapid mixing device to a modified commercial flow cytometer to achieve mixing and measurement of sample in under 1 s. Because such screw-driven mixers are designed to deliver fluid at rates of microliters per millisecond and cytometers accept samples at microliters per second, the syringe mixer was modified with a screw to allow sample delivery at rates as low as 1.8 μl/s. A custom-made nozzle holder featuring a fast-acting three-way sample delivery valve and a 1.5- μl dead volume was designed for a Becton Dickinson FACS stream-in-air flow nozzle. Syringe motors and valves are computer controlled, as is the start signal for an adjustable time ramp. A stable sample stream can be established within the sheath stream in less than 1 s, enabling fluorescence measurements of microspheres with coefficients of variation of ~ 5%. Light scatter gating to select particles in the center of the laser beam enables fluorescence measurements at times of under 300 ms. Efficient mixing of reagents is demonstrated by the iodide quenching of microspheres surface labeled with fluorescein isothiocyanate (FITC). The instrument is capable of quantitatively proportioning cells and reagent, thereby allowing precise control of reagent concentration and dilution. Rapid kinetic measurements of intact cells are demonstrated by FITC-formyl peptide binding to cell surface receptors.

Original languageEnglish (US)
Pages (from-to)223-229
Number of pages7
JournalCytometry
Volume21
Issue number3
DOIs
StatePublished - 1995

Fingerprint

Syringes
Fluorescein
Microspheres
Fluorescence
Architectural Accessibility
Cell Surface Receptors
Iodides
Flow Cytometry
Lasers
Air
Light
Equipment and Supplies
Peptides
isothiocyanic acid

Keywords

  • Formyl peptide
  • Ligand binding

ASJC Scopus subject areas

  • Hematology
  • Cell Biology
  • Pathology and Forensic Medicine
  • Biophysics
  • Endocrinology

Cite this

Nolan, J. P., Posner, R. G., Martin, J. C., Habbersett, R., & Sklar, L. A. (1995). A rapid mix flow cytometer with subsecond kinetic resolution. Cytometry, 21(3), 223-229. https://doi.org/10.1002/cyto.990210302

A rapid mix flow cytometer with subsecond kinetic resolution. / Nolan, J. P.; Posner, Richard G; Martin, J. C.; Habbersett, R.; Sklar, L. A.

In: Cytometry, Vol. 21, No. 3, 1995, p. 223-229.

Research output: Contribution to journalArticle

Nolan, JP, Posner, RG, Martin, JC, Habbersett, R & Sklar, LA 1995, 'A rapid mix flow cytometer with subsecond kinetic resolution', Cytometry, vol. 21, no. 3, pp. 223-229. https://doi.org/10.1002/cyto.990210302
Nolan, J. P. ; Posner, Richard G ; Martin, J. C. ; Habbersett, R. ; Sklar, L. A. / A rapid mix flow cytometer with subsecond kinetic resolution. In: Cytometry. 1995 ; Vol. 21, No. 3. pp. 223-229.
@article{5365b4f8b3fc4a69936a894f57ca7464,
title = "A rapid mix flow cytometer with subsecond kinetic resolution",
abstract = "Kinetic approaches are valuable tools for mechanistic studies of cell function. Flow cytometry is well suited to make sensitive kinetic measurements, but the time required to deliver mixed samples to the point of measurement (10-20 s in a conventional cytometer) limits analysis of rapidly occurring events. To address this limitation, we adapted a syringe-based stopped-flow rapid mixing device to a modified commercial flow cytometer to achieve mixing and measurement of sample in under 1 s. Because such screw-driven mixers are designed to deliver fluid at rates of microliters per millisecond and cytometers accept samples at microliters per second, the syringe mixer was modified with a screw to allow sample delivery at rates as low as 1.8 μl/s. A custom-made nozzle holder featuring a fast-acting three-way sample delivery valve and a 1.5- μl dead volume was designed for a Becton Dickinson FACS stream-in-air flow nozzle. Syringe motors and valves are computer controlled, as is the start signal for an adjustable time ramp. A stable sample stream can be established within the sheath stream in less than 1 s, enabling fluorescence measurements of microspheres with coefficients of variation of ~ 5{\%}. Light scatter gating to select particles in the center of the laser beam enables fluorescence measurements at times of under 300 ms. Efficient mixing of reagents is demonstrated by the iodide quenching of microspheres surface labeled with fluorescein isothiocyanate (FITC). The instrument is capable of quantitatively proportioning cells and reagent, thereby allowing precise control of reagent concentration and dilution. Rapid kinetic measurements of intact cells are demonstrated by FITC-formyl peptide binding to cell surface receptors.",
keywords = "Formyl peptide, Ligand binding",
author = "Nolan, {J. P.} and Posner, {Richard G} and Martin, {J. C.} and R. Habbersett and Sklar, {L. A.}",
year = "1995",
doi = "10.1002/cyto.990210302",
language = "English (US)",
volume = "21",
pages = "223--229",
journal = "Cytometry",
issn = "0196-4763",
publisher = "John Wiley and Sons Inc.",
number = "3",

}

TY - JOUR

T1 - A rapid mix flow cytometer with subsecond kinetic resolution

AU - Nolan, J. P.

AU - Posner, Richard G

AU - Martin, J. C.

AU - Habbersett, R.

AU - Sklar, L. A.

PY - 1995

Y1 - 1995

N2 - Kinetic approaches are valuable tools for mechanistic studies of cell function. Flow cytometry is well suited to make sensitive kinetic measurements, but the time required to deliver mixed samples to the point of measurement (10-20 s in a conventional cytometer) limits analysis of rapidly occurring events. To address this limitation, we adapted a syringe-based stopped-flow rapid mixing device to a modified commercial flow cytometer to achieve mixing and measurement of sample in under 1 s. Because such screw-driven mixers are designed to deliver fluid at rates of microliters per millisecond and cytometers accept samples at microliters per second, the syringe mixer was modified with a screw to allow sample delivery at rates as low as 1.8 μl/s. A custom-made nozzle holder featuring a fast-acting three-way sample delivery valve and a 1.5- μl dead volume was designed for a Becton Dickinson FACS stream-in-air flow nozzle. Syringe motors and valves are computer controlled, as is the start signal for an adjustable time ramp. A stable sample stream can be established within the sheath stream in less than 1 s, enabling fluorescence measurements of microspheres with coefficients of variation of ~ 5%. Light scatter gating to select particles in the center of the laser beam enables fluorescence measurements at times of under 300 ms. Efficient mixing of reagents is demonstrated by the iodide quenching of microspheres surface labeled with fluorescein isothiocyanate (FITC). The instrument is capable of quantitatively proportioning cells and reagent, thereby allowing precise control of reagent concentration and dilution. Rapid kinetic measurements of intact cells are demonstrated by FITC-formyl peptide binding to cell surface receptors.

AB - Kinetic approaches are valuable tools for mechanistic studies of cell function. Flow cytometry is well suited to make sensitive kinetic measurements, but the time required to deliver mixed samples to the point of measurement (10-20 s in a conventional cytometer) limits analysis of rapidly occurring events. To address this limitation, we adapted a syringe-based stopped-flow rapid mixing device to a modified commercial flow cytometer to achieve mixing and measurement of sample in under 1 s. Because such screw-driven mixers are designed to deliver fluid at rates of microliters per millisecond and cytometers accept samples at microliters per second, the syringe mixer was modified with a screw to allow sample delivery at rates as low as 1.8 μl/s. A custom-made nozzle holder featuring a fast-acting three-way sample delivery valve and a 1.5- μl dead volume was designed for a Becton Dickinson FACS stream-in-air flow nozzle. Syringe motors and valves are computer controlled, as is the start signal for an adjustable time ramp. A stable sample stream can be established within the sheath stream in less than 1 s, enabling fluorescence measurements of microspheres with coefficients of variation of ~ 5%. Light scatter gating to select particles in the center of the laser beam enables fluorescence measurements at times of under 300 ms. Efficient mixing of reagents is demonstrated by the iodide quenching of microspheres surface labeled with fluorescein isothiocyanate (FITC). The instrument is capable of quantitatively proportioning cells and reagent, thereby allowing precise control of reagent concentration and dilution. Rapid kinetic measurements of intact cells are demonstrated by FITC-formyl peptide binding to cell surface receptors.

KW - Formyl peptide

KW - Ligand binding

UR - http://www.scopus.com/inward/record.url?scp=0028788728&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0028788728&partnerID=8YFLogxK

U2 - 10.1002/cyto.990210302

DO - 10.1002/cyto.990210302

M3 - Article

VL - 21

SP - 223

EP - 229

JO - Cytometry

JF - Cytometry

SN - 0196-4763

IS - 3

ER -