Research Output 1998 2019

2019
Connectin
Muscle
Calcium
Muscles
Actins

Demagnetizing field in single crystal ferromagnetic shape memory alloys

Eberle, J. L., Feigenbaum, H. P. & Ciocanel, C., Feb 1 2019, In : Smart Materials and Structures. 28, 2, 025022.

Research output: Contribution to journalArticle

shape memory alloys
Shape memory effect
Demagnetization
Single crystals
Magnetic fields

Distributed wind resource assessment: Comparing measured annual energy production with predictions from computational fluid dynamics

Martindale, D. L. & Acker, T. L., Dec 1 2019, In : Wind Engineering. 43, 6, p. 657-672 16 p.

Research output: Contribution to journalArticle

Computational fluid dynamics
Wind turbines
Surface roughness
Boundary conditions
Economics

Energy and emissions analysis of ice thermal energy storage in the western US

Sepehri, A. & Nelson, B. A., Nov 1 2019, In : Energy and Buildings. 202, 109393.

Research output: Contribution to journalArticle

Thermal energy
Energy storage
Ice
Electricity
Carbon

Instability and convection in rotating porous media: A review

Vadasz, P., Aug 1 2019, In : Fluids. 4, 3, 147.

Research output: Contribution to journalReview article

Open Access
Natural convection
free convection
Porous materials
convection
Buoyancy

Introduction to the special issue of Wind Engineering related to the 2017 NAWEA symposium

Acker, T. L., Feb 1 2019, In : Wind Engineering. 43, 1, 1 p.

Research output: Contribution to journalEditorial

Open Access
Reverse osmosis
Desalination
genetic algorithm
desalination
Genetic algorithms

Optomechanical design considerations for a vacuum window for optical and infrared interferometry

Ernesto Penado, F. & Clark, J. H., Jan 1 2019, Optomechanical Engineering 2019. Doyle, K. B. & Ellis, J. D. (eds.). SPIE, 1110002. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11100).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Interferometry
interferometry
Vacuum
Infrared
Infrared radiation
2018
6 Citations (Scopus)

Calcium increases titin N2A binding to F-actin and regulated thin filaments

Dutta, S., Tsiros, C., Sundar, S. L., Athar, H., Moore, J., Nelson, B. A., Gage, M. J. & Nishikawa, K. C., Dec 1 2018, In : Scientific Reports. 8, 1, 14575.

Research output: Contribution to journalArticle

Connectin
Actins
Calcium
Muscle Contraction
Spectrum Analysis
1 Citation (Scopus)

Calibration of a simple directional distortional hardening model for metal plasticity

Parma, S., Plešek, J., Marek, R., Hrubý, Z., Feigenbaum, H. P. & Dafalias, Y. F., Jan 1 2018, (Accepted/In press) In : International Journal of Solids and Structures.

Research output: Contribution to journalArticle

Hardening
plastic properties
Plasticity
hardening
Calibration
2 Citations (Scopus)

Case study: A bio-inspired control algorithm for a robotic foot-ankle prosthesis provides adaptive control of level walking and stair ascent

Tahir, U., Hessel, A. L., Lockwood, E. R., Tester, J., Han, Z., Rivera, D. J., Covey, K. L., Huck, T. G., Rice, N. A. & Nishikawa, K. C., Jan 1 2018, In : Frontiers Robotics AI. 5, APR, 36.

Research output: Contribution to journalArticle

Biocontrol
Stairs
Filament winding
Robotics
Muscle
3 Citations (Scopus)

Development of a PEO-based lithium ion conductive epoxy resin polymer electrolyte

Andrews, W. T., Liebig, A., Cook, J., Marsh, P., Ciocanel, C., Lindberg, G. E. & Browder, C. C., Nov 15 2018, In : Solid State Ionics. 326, p. 150-158 9 p.

Research output: Contribution to journalArticle

Epoxy Resins
epoxy resins
Polyethylene oxides
Lithium
Epoxy resins
2 Citations (Scopus)

Experimental characterization and model predictions for twisted polymer actuators in free torsion

Swartz, A. M., Ruiz, D. R. H., Feigenbaum, H. P., Shafer, M. W. & Browder, C. C., Sep 25 2018, In : Smart Materials and Structures. 27, 11, 114002.

Research output: Contribution to journalArticle

Torsional stress
torsion
Polymers
Actuators
actuators

Experimental verification of compliant mirror wavefront correction using a single actuator

Clark, J. H., Penado, F. E., Heilman, M. & Clark, W. E., Jan 1 2018, Optical System Alignment, Tolerancing, and Verification XII. Sasian, J. & Youngworth, R. N. (eds.). SPIE, Vol. 10747. 1074708

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wavefront Correction
Wavefronts
Wave Front
Actuator
Mirror
1 Citation (Scopus)

Fracture parameter determination for the orthotropic interface crack with friction

Penado, F. E., Dec 1 2018, In : Engineering Fracture Mechanics. 204, p. 542-556 15 p.

Research output: Contribution to journalArticle

Friction
Cracks
Delamination
Stress intensity factors
Crack propagation

Graduate and undergraduate university programs in wind energy in the United States

Swift, A., Tegen, S., Acker, T. L., Manwell, J., Pattison, C. & McGowan, J., Jan 1 2018, (Accepted/In press) In : Wind Engineering.

Research output: Contribution to journalArticle

Wind power
Education
Industry
Electricity

Heat Flux Vector Potential in Convective Heat Transfer

Vadasz, P., May 1 2018, In : Journal of Heat Transfer. 140, 5, 051701.

Research output: Contribution to journalArticle

convective heat transfer
Heat flux
heat flux
Heat transfer
heat
1 Citation (Scopus)

Hydropower impacts on electrical system production costs in the Southwest United States

Bain, D. M. & Acker, T. L., Feb 1 2018, In : Energies. 11, 2, en11020368.

Research output: Contribution to journalArticle

Hydroelectric power
Drought
Operating costs
Electricity
Rivers

Implications of energy storage and climate change for pollution control under the Clean Air Act

Wadsack, K., Nielsen, E., Auberle, W. & Acker, T. L., Dec 1 2018, In : Electricity Journal. 31, 10, p. 17-23 7 p.

Research output: Contribution to journalArticle

Pollution control
Climate change
Energy storage
Gas plants
Air
1 Citation (Scopus)

Natural convection in rotating flows

Vadasz, P., Jul 5 2018, Handbook of Thermal Science and Engineering. Springer International Publishing, p. 691-758 68 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Natural convection
Buoyancy
Fluids
Porous materials
Coriolis force
12 Citations (Scopus)

Past visions, current trends, and future context: A review of building energy, carbon, and sustainability

Wang, N., Phelan, P. E., Harris, C., Langevin, J., Nelson, B. A. & Sawyer, K., Feb 1 2018, In : Renewable and Sustainable Energy Reviews. 82, p. 976-993 18 p.

Research output: Contribution to journalReview article

Sustainable development
Carbon
Energy utilization
Innovation
Productivity

Periodic freezing of water and melting of ice in asphalt as a porous medium subject to diurnal step temperature oscillations

Linares, C. P. M., Ho, C-H. & Vadasz, P., Jan 1 2018, In : International Heat Transfer Conference. 2018-August, p. 7961-7968 8 p.

Research output: Contribution to journalConference article

asphalt
Ice
Asphalt
Freezing
freezing

Solid-state polymer electrolytes with a poly(ethylene glycol) epoxy resin polymer host

Browder, C. C., Lindberg, G. E. & Ciocanel, C., Jan 1 2018, Battery Engineering for Automotive Applications 2018, Held at AABC 2018. Cambridge EnerTech, Cambridge Innovation Institute, 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Epoxy resins
Polyethylene glycols
Electrolytes
Polymers

Solid-state polymer electrolytes with a poly(Ethylene glycol) epoxy resin polymer host

Browder, C. C., Lindberg, G. E. & Ciocanel, C., Jan 1 2018, Automotive Partnering Summit 2018, Held at AABC 2018. Cambridge EnerTech, Cambridge Innovation Institute, 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Epoxy resins
Polyethylene glycols
Electrolytes
Polymers

Structural material with intrinsic power storage capability for use in hybrid electrochemical systems

Ciocanel, C., Lindberg, G. E. & Browder, C. C., Jan 1 2018, Battery Engineering for Automotive Applications 2018, Held at AABC 2018. Cambridge EnerTech, Cambridge Innovation Institute, 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Structural material with intrinsic power storage capability for use in hybrid electrochemical systems

Ciocanel, C., Lindberg, G. E. & Browder, C. C., Jan 1 2018, Automotive Partnering Summit 2018, Held at AABC 2018. Cambridge EnerTech, Cambridge Innovation Institute, 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
Harvesters
Open circuit voltage
open circuit voltage
Magnetic fields
magnetic fields
2017
1 Citation (Scopus)

Analysis of the partially closed interface crack in orthotropic materials

Penado, F. E., Jan 1 2017, (Accepted/In press) In : Journal of Thermoplastic Composite Materials.

Research output: Contribution to journalArticle

cracks
Cracks
transverse loads
shear
bonded joints
2 Citations (Scopus)

A novel biomimetic torsional actuator design using twisted polymer actuators

Shafer, M. W., Feigenbaum, H. P. & Ruiz, D. R. H., Jan 1 2017, Development and Characterization of Multifunctional Materials; Mechanics and Behavior of Active Materials; Bioinspired Smart Materials and Systems; Energy Harvesting; Emerging Technologies. American Society of Mechanical Engineers, Vol. 1.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Biomimetics
Actuators
Polymers
Fibers
Fabrication
2 Citations (Scopus)

Instability and route to chaos in porous media convection

Vadasz, P., Jun 1 2017, In : Fluids. 2, 2, 26.

Research output: Contribution to journalReview article

Open Access
Chaos theory
Porous materials
chaos
convection
routes

Magnetic field within a magnetic shape memory alloy and an equivalent uniform applied magnetic field for model input

Eberle, J. L., Feigenbaum, H. P. & Ciocanel, C., Jan 1 2017, Development and Characterization of Multifunctional Materials; Mechanics and Behavior of Active Materials; Bioinspired Smart Materials and Systems; Energy Harvesting; Emerging Technologies. American Society of Mechanical Engineers, Vol. 1.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Shape memory effect
Magnetic fields
Finite element method
Volume fraction
Plastic deformation
1 Citation (Scopus)

Numerical convergence in simulations of multiaxial ratcheting with directional distortional hardening

Welling, C. A., Marek, R., Feigenbaum, H. P., Dafalias, Y. F., Plesek, J., Hruby, Z. & Parma, S., 2017, (Accepted/In press) In : International Journal of Solids and Structures.

Research output: Contribution to journalArticle

Hardening
hardening
numerical integration
Numerical integration
Plastics
15 Citations (Scopus)

Ten questions concerning future buildings beyond zero energy and carbon neutrality

Wang, N., Phelan, P. E., Gonzalez, J., Harris, C., Henze, G. P., Hutchinson, R., Langevin, J., Lazarus, M. A., Nelson, B. A., Pyke, C., Roth, K., Rouse, D., Sawyer, K. & Selkowitz, S., Jul 1 2017, In : Building and Environment. 119, p. 169-182 14 p.

Research output: Contribution to journalArticle

neutrality
building
energy
Carbon
carbon
2016
8 Citations (Scopus)

Applying the kriging method to predicting irradiance variability at a potential PV power plant

Monger, S. H., Morgan, E. R., Dyreson, A. R. & Acker, T. L., Feb 1 2016, In : Renewable Energy. 86, p. 602-610 9 p., 7088.

Research output: Contribution to journalArticle

Power plants
Sensors
Sensor arrays
Interpolation
1 Citation (Scopus)

Compliant deformable mirror approach for wavefront improvement

Clark, J. H. & Penado, F. E., Apr 1 2016, In : Optical Engineering. 55, 4, 043107.

Research output: Contribution to journalArticle

deformable mirrors
Wavefronts
Mirrors
mirrors
navy
7 Citations (Scopus)

Experimental characterization and modeling of a three-variant magnetic shape memory alloy

Feigenbaum, H. P., Ciocanel, C., Eberle, J. L. & Dikes, J. L., Sep 7 2016, In : Smart Materials and Structures. 25, 10, 104004.

Research output: Contribution to journalArticle

shape memory alloys
Shape memory effect
martensite
Martensite
predictions
5 Citations (Scopus)

First steps in modeling thermal actuation of twisted polymer actuators using virgin material properties

Shafer, M. W., Feigenbaum, H. P., Pugh, D. & Fisher, M., 2016, Modeling, Simulation and Control; Bio-Inspired Smart Materials and Systems; Energy Harvesting. American Society of Mechanical Engineers, Vol. 2. V002T06A017

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Materials properties
Actuators
Polymers
Fibers
Stiffness
3 Citations (Scopus)
Open Access
compressible fluids
Quantum theory
Navier-Stokes equation
Navier Stokes equations
quantum mechanics
2015
12 Citations (Scopus)

A full 3D thermodynamic-based model for magnetic shape memory alloys

LaMaster, D. H., Feigenbaum, H. P., Ciocanel, C. & Nelson, I. D., Apr 27 2015, In : Journal of Intelligent Material Systems and Structures. 26, 6, p. 663-679 17 p.

Research output: Contribution to journalArticle

Shape memory effect
Thermodynamics
Magnetization
Magnetic fields
Magnetic domains

Analyzing nanofluids suspension using the porous media interface heat transfer model

Vadasz, P. & Vadasz, P., Jan 1 2015, Handbook of Porous Media, Third Edition. CRC Press, p. 513-532 20 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Porous materials
Thermal conductivity
Suspensions
Heat transfer
Experiments

An investigation of the material and model parameters for a constitutive model for MSMAs

Dikes, J., Feigenbaum, H. P. & Ciocanel, C., 2015, Proceedings of SPIE - The International Society for Optical Engineering. SPIE, Vol. 9435. 943539

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Constitutive Model
Constitutive models
Prediction Model
Calibration
predictions
2 Citations (Scopus)

Capturing analytically the transition to weak turbulence and its control in porous media convection

Vadasz, P., 2015, In : Journal of Porous Media. 18, 11, p. 1075-1089 15 p.

Research output: Contribution to journalArticle

feedback control
Feedback control
Porous Media
Convection
Porous materials

Development of a product-oriented manufacturing processes laboratory

Tester, J., 2015, 122nd ASEE Annual Conference and Exposition: Making Value for Society. American Society for Engineering Education

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mechanical engineering
Product design
Students
Machining
1 Citation (Scopus)

Elliptically framed tip-tilt mirror optimized for stellar tracking

Clark, J. H., Penado, F. E. & Petak, J., 2015, Proceedings of SPIE - The International Society for Optical Engineering. SPIE, Vol. 9573. 95730B

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Tip-tilt
Tie
Mirror
Mirrors
mirrors
1 Citation (Scopus)

Experimental investigation and model predictions of a nimnga alloy's response to three dimensional magneto-mechanical loading

Dikes, J. L. & Feigenbaum, H. P., 2015, Development and Characterization of Multifunctional Materials; Mechanics and Behavior of Active Materials; Modeling, Simulation and Control of Adaptive Systems. American Society of Mechanical Engineers, Vol. 1.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Shape memory effect
Martensite
Calibration
Microstructure
Experiments
1 Citation (Scopus)

Feedback control for promoting or suppressing the transition to weak turbulence in porous media convection

Vadasz, P., Jan 1 2015, Handbook of Porous Media, Third Edition. CRC Press, p. 459-470 12 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Feedback control
Porous materials
Turbulence
Fluids
Convection
9 Citations (Scopus)
rotating flow
heat transfer
fluid flow
Porous materials
porous medium
1 Citation (Scopus)

Further insight on the power harvesting capabilities of magnetic shape memory alloys

Guiel, R., Dikes, J. L., Ciocanel, C. & Feigenbaum, H. P., 2015, Integrated System Design and Implementation; Structural Health Monitoring; Bioinspired Smart Materials and Systems; Energy Harvesting. American Society of Mechanical Engineers, Vol. 2.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Shape memory effect
Magnetic fields
Compressive stress
Axial compression
Open circuit voltage

Methanol from electricity, water and carbon dioxide: Operational results

Morgan, E. R. & Acker, T. L., 2015, Advances in Solar Buildings and Conservation; Climate Control and the Environment; Alternate Fuels and Infrastructure; ARPA-E; Combined Energy Cycles, CHP, CCHP, and Smart Grids; Concentrating Solar Power; Economic, Environmental, and Policy Aspects of Alternate Energy; Geothermal Energy, Harvesting, Ocean Energy and Other Emerging Technologies; Hydrogen Energy Technologies; Low/Zero Emission Power Plants and Carbon Sequestration; Micro and Nano Technology Applications and Materials. American Society of Mechanical Engineers, Vol. 1.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Carbon dioxide
Methanol
Electricity
Flow rate
Water
5 Citations (Scopus)

Numerical implementation of a model with directional distortional hardening

Marek, R., Plešek, J., Hrubỳ, Z., Parma, S., Feigenbaum, H. P. & Dafalias, Y. F., Dec 1 2015, In : Journal of Engineering Mechanics. 141, 12, 04015048.

Research output: Contribution to journalArticle

Tensors
Hardening
Stiffness
Data storage equipment